How To GetaGrip!™ On Your Rolls
|
Open Kit |
Grind Rolls |
#16 Sanding Disk |
Clean & Rough |
|
Clean w Degreaser |
Tape Ends |
Prepared Rolls |
Kit Contents |
|
Begin Half Hour |
Start Mixing |
Mix Well |
Add 2 Caps Grit |
|
Mix In Grit |
Apply To Roll |
Spread Out |
Brush Even |
|
Predrilled Caps |
Spread Grit |
Tamp Into Glue |
Remove Tape |
|
End Half Hour |
F36GS (Fine Grit) |
Rolls w GetaGrip!™ |
GetaGrip!™ |
In Warm Conditions Allow At Least Half A Day For The GetaGrip!™ To Cure Hard.
Whenever possible, Allow a Full Day For The GetaGrip!™ To Cure Hard.
